Etimol

Etimol Defoamer DFL-C

Recommended method of application: Antifoam additive with a special formulation that reduces and inhibits foaming in industrial process fluids

Antifoam additive with a special formulation that reduces and inhibits foaming in industrial process fluids

Cat.-No. 5122
5122-Kanister-30l-Etimol-Defoamer DFL-C-EN_520x520px

Technical Data

Appearance: colourless to yellowish, transparent liquid
Application: Addition of 0,1 – 10 % defoamer – The concentration needed varies greatly depending on the foaming problem
Density at 20 °C: 0.92 – 0.94 g/cm³
System: water-based with glycol ethers, polyhydric alcohols, special antifoaming agents
Flash point: 87 °C
Storage conditions (recommendation): cool, dry and light protected at 5 – 25 °C
Hazardous goods: No
Durability: 36 months

Description

Etimol Defoamer DFL-C is an cocentrate of antifoam additive with a special formulation of chemical agents that reduces and inhibits foam formation in industrial process fluids.
The additive was specially developed for the EO-Cleaner (especially for the ETIMOL®-cleaning types) to avoid foaming or to break an already formed foam.
Etimol Defoamer DFL-C prevents foaming of the cleaning bath during spraying and rinsing. The additive extends the process window and compensates for the reduced cleaning performance due to process-related contamination. This high-performance concentrate is very effective even in very small amounts.

Safety (occupational safety/environment/transport):
Additional information on the ingredients (hazardous substances), safe handling, storage, transport and disposal can be found in the current safety data sheet (SDS, SDS, MSDS).
The components of EO-Defoamer DFL-C have a very low order of toxicity, although prolonged contact with the skin or contact with the eyes may cause some irritation.
Application/Dosage Etimol Defoamer DFL-C:
Addition of 0,1 – 10 % defoamer – The concentration needed varies greatly depending on the foaming problem

Customer added value

  • Very effective, already works in very low dosage
  • Designed for cleaning systems that require high defoaming efficiency (defoaming power) in adverse conditions and are stable over a longer period of time
  • Application also possible for non-aqueous systems
  • Non-combustible (flash point >80 °C)
  • Easy handling and dosing
  • Cost savings through low consumption

Packaging units

  • Other packaging units on request
  • Canister 5 l to 30 l