Water-based, ready for use ETIMOL
| Appearance: | colourless to slightly yellow, clear liquid |
| Application: | ready for use or 1:1 with DI water |
| ph-value: | alkaline |
| Density at 20 °C: | 0.995 +/- 0.005 g/cm³ |
| Boiling point/boiling range: | >100 °C |
| System: | water-based (ready for use) |
| Flash point: | not applicable |
| Operations temperature: | room temperature |
| Reliable cleaning results with: | flux residues, condensate from PCB boards |
| Storage conditions (recommendation): | in closed original packaging at 10 – 25 °C |
| Hazardous goods: | no |
| Durability: | 36 months |
The water-based, alkaline cleaning medium efficiently removes flux residues and outgassing from circuit boards, from condensate traps and from machine parts. Due to the foam-free formula, the product can be used in compressed-air supported systems as well as spray systems, in most cases without the addition of defoaming agents.
Application notes:
Depending on the case of application, the cleaning medium is filled in the automatic cleaning system ready for use or diluted 1:1 with DI water at room temperature. Cleaning at increased temperature (40 – 45 °C) also accelerates the cleaning effect. For the cleaning of soldering frames an application temperature of at least 45 °C is recommended.
Etimol PC 50 RAA is aslo available as concentrate (equal mix 1 part Etimol PC 55 CA + 7 parts DI-Water)
Note:
Consider approvals of equipment manufacturer!
