Close this search box.

Etimol Etimol PC 55 CA

Recommended method of application
Solder frame and condensate trap cleaning

Water-based ETIMOL concentrate

Cat.-No. 5110
Canister with 30l Etimol PC 55 CA

Technical Data

Appearance: colourless to slightly yellow, clear liquid
Application: 1:7 – 1:10 with DI-water
ph-value: alkaline
Density at 20 °C: 0.956 +/- 0.005 g/cm³
Boiling point/boiling range: >100 °C
System: water-based
Flash point: not applicable
Operations temperature: ideal at 45 – 65°C
Reliable cleaning results with: flux residues, condensate from PCB boards
Storage conditions (recommendation): in closed original packaging at 10 – 25 °C
Hazardous goods: No
Durability: 36 months


The water-based, alkaline cleaning medium efficiently removes flux residues from soldering frames, from condensate traps and from machine parts. Due to the foam-free formula, the product can be used in compressed-air supported systems as well as spray systems, in most cases without the addition of defoaming agents.

Application notes:
Depending on the case of application, the cleaning medium is diluted 1:7 – 1:10 with DI water and filled in the automatic cleaning system. Recommended cleaning temperature between 45 – 65 °C.

Consider approvals of equipment manufacturer!

Customer added value

  • Multi-purpose, aqueous cleaning media for soldering pallets, condensate trap and machine parts cleaning
  • Foamless formulation, residue-free rinsing, low odour
  • Replacement for flammable and corrosive chemicals in maintenance cleaning operations

Packaging units