ESD Cleaner (surface cleaner)
Manual cleaning of surfaces with additional antistatic formulation (WEEE/RoHS compliant)
| Appearance: | light turquoise-blue, clear liquid |
| Density at 20 °C: | 0.9 – 1.0 g/ml |
| Solvent: | water-glycol ether mixture with antistatic active complex |
| pH-Value: | 7 – 10 |
| Flash point: | not applicable (>80 °C c.c) |
| Storage conditions (recommendation): | cool, dry and protected from light at 5 – 25 °C |
EO-RA-ESD/01 has been specially developed for the manual cleaning of dissipative and conductive surfaces, especially for the ESD area. This ESD surface cleaner contains an effective cleaning system, which is equipped with two functions. So dusty or dirty surfaces are thoroughly cleaned and at the same time the ESD properties of the surface, through the additional effect of the antistatic Formulation are positively influenced.
Grease and lubricant films as well as stubborn contaminants are removed perfectly. The compatibility of the cleaner with common plastics is good. The surface is not affected by the product. The plastic cleaner exhibits gentle properties on sensitive surfaces. The product can be used in a wide range, as plastics are cleaned and maintained highly effectively.
EO-RA-ESD/01 is also suitable for coated or painted surfaces of all kinds. To ensure that the cleaner does not cause any undesirable reactions with the surface to be cleaned, we recommend carrying out a compatibility/resistance test on small areas beforehand for this type of application
