No Clean-Flux, alcohol- and water-based
Di-carboxylic acids, resin-free, halogen-free (WEEE/RoHS compliant)
Type ISO-9454: 2131 DIN EN 61 190-1-1 (ORL0)
| Appearance: | colourless, clear liquid |
| Hazardous goods: | Yes |
| VOC: | 67.3 % |
| Solids content: | 2.7 wt.-% |
| Acid number: | 22 – 26 mg KOH/g |
| Halogen-free: | Yes |
| Resiny: | No |
| Density at 20 °C: | 0.87 g/ml |
| Activators: | di-carboxylic acids, resin-free, halogen-free |
| Solvents: | short-chain alcohols and water |
| Flash point: | 12 °C |
| Available as concentrate: | No |
| Durability: | 24 months |
The EO-Y-001 has been developed to be used with wave and selective soldering. In addition, the flux can also be used for manual soldering and cable tinning (multiflux).
Practice has shown that with the correct application, no washing of assembled printed circuit boards soldered with this flux is needed.
