No Clean-Flux, alcohol- and water-based
Di-carboxylic acids, resin-free, halogen-free (WEEE/RoHS compliant)
Type ISO-9454: 2131 \ DIN EN 61 190-1-1 (ORL0)
| Appearance: | colourless to light yellow, clear liquid |
| Hazardous goods: | No |
| VOC: | 6 % |
| Solids content: | 3.5 – 3.7 wt.-% |
| Acid number: | 28 – 32 mg KOH/g |
| Halogen-free: | Yes |
| Resiny: | No |
| Density at 20 °C: | 0.9 – 1.0 g/ml |
| Activators: | di-carboxylic acids, resin-free, halogen-free |
| Solvents: | short-chain alcohols and water |
| Flash point: | hardly flammable |
| Available as concentrate: | No |
| Durability: | 12 months |
The hybrid EO-Y-004 flux was developed to be used in wave and selective soldering. It exhibits a solids content of 3.5 – 3.7 wt.-%. It has been developed for a very broad range of applications. The soldering properties are very good, particularly with rise-through and circuit-board wetting. The processing window is very broad with great thermal stability. Practice has shown that with proper application, no washing of circuit boards soldered with this flux is needed. The circuit boards are visually clean. The flux is available as a ready-to-use-mix or in a granulate-based concentrate.
