Elektronik
Search
Close this search box.

Alcohol- and water-based flux EO-Y-005C (multiflux)

Recommended method of application
Wave and selective soldering

No Clean-Flux, water-based with alcohol additive
Di-carboxylic acids, low VOC, halogen-free activated, with synthetic resin, rosin-free (WEEE/RoHS-compliant)
Type ISO-9454: 2231 (2.2.3.A) DIN EN 61190-1-1 (acc. J-STD-004) (ORL0)

Cat.-No. 6026
6026-Kanister-EO-Y-005C-EN_520x520px

Technical Data

Appearance: clear, colourless liquid
Hazardous goods: No
VOC: 7 %
Solids content: 4.0 wt.-%
Acid number: 33 – 36 mg KOH/g
Halogen-free: Yes
Resiny: Yes
Density at 20 °C: 0.9 – 1.0 g/ml
Activators: di-carboxylic acids, synthetic resin
Solvents: water with alcohol additive
Flash point: hardly flammable
Available as concentrate: No
Durability: 12 months

Description

EO-Y-005C is universally suitable for wave and selective-soldering of PCBs. It contains organic, halogen-free, activating additives as well as synthetic resin in a combination specially tuned to the thermal requirements of the wave-soldering process with leaded and lead-free solders.
EO-Y-005C contains small amounts of special alcoholic additives for stabilization and improved drying time compared to conventional water-based fluxes.

This flux must be applied by spraying.
After application, it is advisable to dry the flux in order to transform the liquid into the fusible phase which favours the soldering operation.

Customer added value

  • Wide range of applications (multiflux)
  • Very good soldering properties (capillarity, wetting)
  • Broad process window (high thermal stability, good activity over a long interval)
  • Very good residue behaviour (optically very clean, high SIR)

Packaging units

Canister: 5 l, 10 l, 20 l