No Clean-Flux, alcohol-based
Di-carboxylic acids, minimal resin content, halogenide-free (WEEE/RoHS compliant)
Type ISO-9454: 2231 DIN EN 61190-1-1: L0 (ORL0)
| Appearance/smell: | colourless to light yellow, clear liquid |
| Hazardous goods: | Yes |
| Solids content: | 2.2 wt.-% |
| Acid number: | 14 – 16 mg KOH/g |
| Halogenide-free: | Yes |
| Resinous: | Yes |
| Available as concentrate: | Yes |
| Density at 20 °C: | 0.793 (+/- 0.003) g/ml |
| Flash point: | 12 °C |
| Durability: | 24 months |
Like all multifluxes the EO-B-001A can be used for wave (spray fluxes) as well as for selective, manual and dip soldering. The A variant has a low 2.2 wt.-% solids content. This variant was developed especially for full-tunnel nitrogen applications. It features a wide processing window and great temperature stability to guarantee a better soldering result than that obtained with traditional adipic acid solutions under full nitrogen. Practice has shown, that no washing is needed for PCBA properly soldered with EO-B-001A.
