No Clean-Flux with halide-free activators (WEEE /RoHS compliant)
Type ISO-9454: 1131 DIN EN 61190-1-1 (acc. to J-STD 004) ROL0
| Appearance: | amber-coloured, clear liquid |
| Solids content: | 54 wt.% |
| Density at 20 °C: | 0.90 – 0.93 g/ml |
| Acid value: | 125 – 140 mg KOH/g |
| Activators: | dicarboxylic acids, resin mixtures, halide-free |
| Solvents: | short-chain alcohols |
| Flash point: | 12 °C |
HTW-48 contains halogen-free activators and was specially developed for dip tinning, hand soldering processes and cable assembly. In principle, the application can be carried out in any way adapted to the individual case (spray fluxing can only be determined by preliminary tests due to the high solids content).
Recommendations for processing this flux:
This flux is very versatile. Good results have been achieved both in hand soldering and dip tinning as well as in cable assembly / strand tinning. The generally applicable rule that the amount of flux applied should always be as low as possible also applies to this product.
This flux can also be used to “PREFLUX” components that will only be tinned or soldered at a later stage.
