Alcohol-based flux

EO-RF-WB30 (reworkflux)

Recommended method of application: Selective soldering, manual soldering

No Clean-Flux, alcohol-based
Di-carboxylic acid complex, halogenide-free (WEEE/RoHS compliant)
Type ISO-9454: 2131 // DIN-EN 61190-1-1 (acc. J-STD004) (IEC: ORL0)

Cat.-No. 4638 (#2963, #3967, #3968)
4638-Kanister-EO-RF-WB30-EN_520x520px

Technical Data

Appearance/smell: colourless to light yellow liquid
Hazardous goods: Yes
Solids content: 4.0 wt.-%
Acid number: 30 – 36 mg KOH/g
Halogenide-free: Yes
Resinous: No
Available as concentrate: No
Density at 20 °C: 0.797 (+/-0.003) g/ml
Flash point: 12 °C
Durability: 12 months

Description

This flux was developed for selective and manual soldering processes as well as cable assembly. EO-RF-WB30 contains the activator system from our proven water-based flux: WB-30…-“system” (and other variants). The application is done by the special EO-flux-dosage-bottle, but can also be done by all usual application methods (except foaming). The solid content is 4 wt.-%. The density of the flux must be checked regularly. As the flux gradually evaporates in all application methods, the concentration increases during processing.

Packaging units

  • Metering bottle 50 ml
  • Metering pen 8 ml
  • Canister 5 l – 30 l