No Clean-Flux, alcohol-based
Di-carboxylic acids, synthetic resin, halogenide-free (WEEE/RoHS compliant)
Type ISO-9454: 1231 // DIN EN 61190-1-1 (acc. J-STD004) IEC: (REL0)
| Appearance/smell: | colourless to reddish, clear liquid |
| Hazardous goods: | Yes |
| Solids content: | 2.5 wt.-% |
| Acid number: | 22 – 25 mg KOH/g |
| Halogenide-free: | Yes |
| Resinous: | Yes |
| Available as concentrate: | No |
| Density at 20 °C: | 0.794 (+/-0.003) g/ml |
| Flash point: | 12 °C |
| Durability: | 12 months |
GSP-2533/RX established over the course of many years, is S-250/FRO’s predecessor. Very good soldering results were achieved regardless of the respective type of system. The cleanliness is very good. GSP-2533/RX is suitable as a wave solder flux for foam and spray fluxing. It’s not recommended for selective or manual soldering. Please note the shelf life of 6 month. Practice has shown, that no washing is needed for PCBA properly soldered with this flux. The IC test with needle adapters generally completes without problems.Recommended thinner for GSP-2533/RX: BX-V (Part Number 1011).
