Flux paste

FP-260

Recommended method of application: Manual, repair and dip soldering, special applications, suitable for SnPb and Pb-free alloys

No Clean-Flux paste based on synthetic resins
Di-carboxylic acids, VOC-free, halogen-free (WEE/RoHS compliant)
Type ISO-9454: 1.2.3.1 \\ DIN EN 61 190-1-1: RELO

Cat.-No. 2998
FP-260_520x520px

Technical Data

Appearance: bright yellow, waxy paste
Smell: mild
Solids content: very high
Density at 20 °C: 0.9 – 1.0 g/ml
Activators: di-carboxylic acids, synthetic resin, halogen-free
Flash point: > 80 °C
Viscosity (DIN EN ISO 3219): 68
Viscosity (DIN 51810-1): start: 3.783 – end: 2.367
Durability: 12 months

Description

The soldering flux paste FP-260 has been developed for repair soldering. In addition, the soldering flux paste is suitable for dip tinning as well as special applications. FP-260 is characterized by a high activity and good wetting and spreading properties. Due to these properties, the paste should be applied sparingly. Application takes place via a dosing syringe with a plastic tip. This enables the accurate dosing and positioning of the paste. The processing of the soldering flux paste can be done with the aid of hot air or soldering irons.

Customer added value

  • Very good soldering properties (capillarity, wetting)
  • Broad process window (very high thermal stability, very high activity over a long interval)
  • Exact dosage
  • No separation
  • Flux residues visible under UV light
  • VOC-free

Packaging units

  • Cartridge
  • Syringe 5 ml and 10 ml