No Clean tubular solder with flux filler material EO-FC-006 (WEEE/RoHS compliant)
Typy ISO 9454-1:2016: 1231 // DIN EN 61190-1-1 (acc. J-STD-004): REL0
| Appearance: | transparent and monochrome |
| Odour: | mild or slightly resinous |
| Solubility: | not water soluble |
| activators: | resin activation complex |
| Total halogenide compounds: | 0 % |
| Melting range: | 100 – 125 °C |
| Solder alloy: | Sn96,5Ag3Cu0,5 |
| Available wire diameters: | Ø 0.3 mm, 0.5 mm, 0.8 mm, 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm & 3.0 mm |
The new, innovative tubular solder guarantees excellent soldering results from hand soldering to wave soldering and laser soldering. The tubular solder is filled with a halogenide-free high-performance filling compound, which was specially developed as a flux filling for the production of lead-free soft solders. The basis of the filling compound is a high-purity synthetic resin, which is built up in combination with a hitherto unique synthetic activation complex and thus meets even the highest qualitative production requirements. The activation effect of the filling compound is more than equal to the halogenide-containing filling compounds used up to now, even though the 3-seal tubular solders only have a flux content of 1.2 %.
The processing of the solder is almost splash-free, with minimal smoke development and excellent residue behaviour, which leaves no dark discolouration or sticky residues. The soldering results are excellent.
